Management Interface

System > System Management > Device Management > Management Interface

The system supports the following access methods: Console, Telnet, SSH and Web. In the Management Interface page, you can configure the timeout value, port number, and PKI trust domain of HTTPS.

Options in the Management Interface page:

Option	Description
Console
Timeout	Type the Console timeout value. The range is from 0 to 10. The default value is 10. 0 indicates no timeout.
Telnet
Timeout	Type the Telnet timeout value. The range is from 1 to 60. The default value is 10.
Port	Type the Telnet port number. The value range is 1 to 65535. The default value is 23.
SSH
Timeout	Type the SSH timeout value. The range is from 1 to 60. The default value is 10.
Port	Type the SSH port number. The value range is 1 to 65535. The default value is 22.
Web
Timeout	Type the WebUI timeout value. The range is from 1 to 1440. The default value is 10.
HTTP Port	Type the HTTP port number. The value range is 1 to 65535. The default value is 80.
HTTPS Port	Type the HTTPS port number. The value range is 1 to 65535. The default value is 443.
HTTPS Trust Domain	Select the trust domain existing in the system from the drop-down list. When HTTPS starts, the HTTPS server will use the certificate in the specified trusted domain.

Notes:

If login fails three times within one minute, the IP address that attempts the login will be prevented for 2 minutes from logging into the device.
When changing the HTTP port, HTTPS port or HTTPS trust domain, the web server will restart. You may need to log in again if you are using the Web interface.