System > Network > VPN > IPSec VPN
After configuring a PnPVPN Client, it can obtain configuration commands from the PnPVPN Server.
In the IKE VPN Configuration section of the IPSec VPN page, click the PnPVPN Client button on the top right corner. In the pop-up dialog, configure the PnPVPN Client settings.
Options in the PnPVPN Configuration dialog:
| Option | Description |
| Server Address |
Type the IP address of the PnPVPN Server into the textbox. |
| ID |
Specifies the IKE ID assigned to the client by the server. |
| Password |
Specifies the password assigned to the client by the server. |
| Confirm password |
Enter the password again to make confirmation. |
| Auto Save |
Select Enable to auto save the DHCP and WINS information released by the PnPVPN Server. |
| Outgoing IF |
Specifies the interface that connects to the Internet from the drop-down menu. |
| Incoming IF |
Specifies the interface on the PnPVPN Server that is accessed by Intranet PCs or application servers. Click the interface you want. If Incoming IF is selected, also select an interface from the Interface drop-down list; if multiple Intranet interfaces connect to PnPVPN, you should click BGroup IF, and add interface members of that bgroup. To add interface members, select the interfaces you want from the Available list, and click right arrow to add to the Selected list. To delete an interface member, select it from the Selected list and click the left arrow. |