Management Interface

System > Network > Basic Network > MGT Interface

In the MGT Interface page, you can configure the binding zone, IP address, and management methods of the management interface.

Options in the MGT Interface page:

Option Description

Interface Name

Displays the name of the management interface. The status indicators indicate the status of the management interface.

Zone

Specifies the zone for the management interface. You can only select a Lay 3 zone.

Type

Specifies the method of obtaining IP address:

  • Static IP: Specifies a static IP address and the netmask. Click Advanced to specify the secondary IP address into the textbox. You can specify up to 6 secondary IP addresses.
  • Auto-obtain: Obtains the IP address through DHCP.

Management

Specified the management methods by selecting the checkboxes of the desired management methods.

Mode

Specifies the mode and rate of the management interface. If you select the Auto duplex transmission mode , you can only select the Auto rate.

Shutdown

Select the Shut down checkbox and click OK to shut down the management interface.